Can a hardware or electrical engineering company sell or license its data to AI companies?
Yes. Hardware and electrical engineering companies with 20 to 2,000 staff can license CAD assemblies, circuit designs and test results, with a published price band of $1M to $1.5M per company as of November 2026. Export-controlled designs and customer-owned files are the main exclusions.
What could your company's records earn? Get a range in 30 seconds. Free, no obligation.
Can an engineering company license its designs to AI companies?
Yes, with care. Buyers publish a program for hardware engineering companies and list CAD assemblies, circuit designs and test results as what they want (published buyer listing, read 20 Nov 2026). The listing states 20 to 2,000 staff and a ceiling in the $1M to $1.5M band, the same band as manufacturing, the highest of 30 industries.
The appeal is the pairing. A design shows what was built. A test result shows whether it worked. Public web data holds almost no matched pairs of the two, so a model trained on both learns something it cannot learn elsewhere. See the full price table by industry.
What are hardware design records worth?
| Item | Figure | Source |
|---|---|---|
| Published price band per company | $1M to $1.5M | Published buyer listing, read 20 Nov 2026 |
| Staff band buyers list | 20 to 2,000 | Same listing |
| Records named | CAD assemblies, circuit designs, test results | Same listing |
Your own offer depends on years of history, how many product generations you can show, and whether designs link to test data. A calculator range shows where a firm of your size lands.
Which records do buyers want from a hardware firm?
- Mechanical design: CAD part and assembly files, revision history, engineering change orders and the reasons given for each change.
- Electrical design: schematics, board layouts, bills of materials and simulation setups.
- Test and validation: bench measurements, environmental and reliability runs, pass and fail logs, and failure analysis write-ups.
Failed designs and the reasoning behind a redesign are valuable. They show what does not work, which is the part that rarely gets published. Revision history matters more than the final file.
Which systems hold hardware records?
Typical homes are a product data management or product lifecycle system for CAD and revisions, a version-control system for firmware and board files, a test-equipment database or shared drive for measurements, and a ticket system for change orders. Files often sit in more than one place with different names. Mapping each file to its product and revision is the main preparation task. See preparing company data.
What can a hardware company not share?
Hardware has the sharpest legal limits of the industry pages here.
- Defense-related technical data. Under the International Traffic in Arms Regulations, technical data means information required for the design, development, production, manufacture, assembly, operation, repair, testing, maintenance or modification of defense articles, including blueprints, drawings and documentation (22 CFR 120.33, eCFR, read 21 Nov 2026). Technical data directly related to the manufacture of significant military equipment is itself designated significant military equipment (22 CFR 120.10, eCFR, read 21 Nov 2026). Treat any file for a defense customer as off limits until counsel clears it.
- Items under the Export Administration Regulations. These regulations cover all items in the United States and all US-origin items wherever located (15 CFR 734.3, eCFR, read 21 Nov 2026). Whether a given design needs a license depends on its classification, so ask counsel.
- Customer-owned designs. If a client paid for a custom design, your contract may give them the rights. Check before including it.
- Third-party parts data. Vendor datasheets and licensed model libraries may carry their own terms.
This page is general information, not legal advice.
How do I start?
Choose one product line with a clean history, confirm none of it is defense-related or customer-owned, and export design files with their revision notes and matching test logs. Then see whether you fit with the qualification check.
What does a sample record look like?
Three linked hardware records a firm could license: CAD revisions, circuit designs, and test results with failure notes.
- Assembly
- Housing assembly, 41 parts
- Revisions
- Rev A to Rev F over 14 months
- Change orders
- 5, each with a written reason
- Linked test
- Thermal run on Rev D, failed at 71 C
- Outcome
- Rev E added a rib; Rev F passed
- Personal details
- Engineer names replaced with roles
- Schematic
- Power board, 212 components
- Board layout
- 4 layers, 3 spins
- Bill of materials
- Version 1.8, 2 parts substituted
- Simulation setup
- Load step test, 1 setup file
- Outcome
- Spin 3 passed validation
- Personal details
- Designer names replaced with roles; no customer files
- Test type
- Environmental and reliability run, 500 hours
- Pass or fail
- Failed at hour 312, connector cracked
- Failure write-up
- 1 analysis, root cause named
- Linked design
- Housing assembly Rev D
- Redesign decision
- Rev E approved, retest passed
- Personal details
- Technician names replaced with roles
Illustrative samples: invented values, real record types.
What has company data sold for?
We record 40 public data sales, each with its price, date and source. Search all 40 recorded data sales.
Questions
Is a hardware firm worth more than a software firm?
The published ceiling is higher: $1M to $1.5M for hardware engineering against $250K to $500K for software companies with private code (published buyer listings, read 20 Nov 2026).
Can I license a design that a customer paid for?
Only if your contract gives you the rights. Otherwise leave it out.
Does export control apply if the buyer is in the US?
It can. The EAR reach all items in the United States, so being a US buyer does not clear a design by itself. Ask counsel before sharing.
Do firmware and code count?
Yes. Code is a separate listing at lower prices; the industry price table shows each band.
Sources
- Published buyer industry listings, read 20 Nov 2026 (buyers not named by policy).
- eCFR, 22 CFR 120.33, Technical data, read 21 Nov 2026: https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.33
- eCFR, 22 CFR 120.10, Introduction to the U.S. Munitions List, read 21 Nov 2026: https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.10
- eCFR, 15 CFR 734.3, Items subject to the EAR, read 21 Nov 2026: https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-734/section-734.3